PentiCam is a complete PC integrated with a PicPort® frame grabber and is based on a combination of notebook PC technology and PMC-size modules. It offers the ultimate integrated vision system by providing image capture from standard and non-standard cameras, Pentium II/III processing power, an interface to all common PC peripherals, Ethernet link for networking and general purpose I/O.
A built-in DC/DC converter board means the PentiCam requires only a single 24 Volt DC external power supply. PentiCam can accept 4 PMC modules such as PicPort® frame grabbers and 3rd party boards (such as I/O, CANbus, Profibus, etc.).
As the PentiCam is based on PC architecture it supports standard operating systems such as Windows NT/2000, Windows NT Embedded, Windows 95/98/Me, and Linux, so the user is not restricted to using dedicated developing tools, often found with common «smart camera» devices. This also eliminates the need for difference between the development system and the target system - just simply connect keyboard, mouse and monitor and start working. Not only does this provide a big advantage during application development but also greatly reduces the risk associated with «field upgrades».
Existing users of Leutron's PicPort® framegrabbers can take full advantage of PentiCam simply by transferring their applications for immediate use.
PentiCam is provided in two basic configurations. The first option includes just the PC and the framegrabber, without built-in camera (dimensions of this model are 91×91×165 mm). The second includes a standard vision camera plus standard lens. Both versions may be further configured by selecting between PicPort®-Mono, PicPort®-Stereo or PicPort®-Color framegrabber, also by choosing the processor, memory size and hard disk capacity. In case of the extended type the customer can also select the required camera and lens. Quantity OEMs can purchase the board set only.
The PentiCam is based on a standard PC computer. Main specifications are:
- Intel Pentium II/III Mobile Module (with 0.25 µm technology) 333/500 MHz
- 64 to 512 MB 3.3 V SDRAM, fitted as a single SO-DIMM; dimension 6.8×2.7 cm max.
- AGP Graphic Controller with 4 MB memory and standard 15-pin HD-sub connector, includes drivers for Windows NT4/2000/95/98/Me (8 MB 3D optional)
- COM1, optional COM2, LPT1, PS/2 Keyboard, PS/2 Mouse, USB Type A, with standard connectors, all accessible on the external housing
- 10/100Mbit Ethernet controller
- Ultra DMA EIDE controller and floppy controller available inside the system for OEM use
- PMC slots for PicPort® frame grabbers or 3rd party modules (3.3V PCI bus)
- State of the art STANDARD BIOS, ensuring a 100% compatibility to existing desktop PCs
- 2.5" hard disk, 2 to 20 GB, shockproof; max. height of 9.5 mm.
- 50-pin CompactFlash Type I and Type II interfaces up to 300 MB Flash Disk (true IDE mode) or IBM's ultra compact 1" Microdirve (340M/512M/1GB).
- DC/DC converters for single 24 VDC, 30-45 W power supply, eliminating the need for extra power supply for connected camera
Input Format
In general PicPort® boards accept video resolutions up to 2048×2048, 2:1 interlaced or non-interlaced mode, pixel shape in accordance with CCIR601 or square.
PicPort® Analog models accept video sources compliant with CCIR or RS170 video standards. In addition many non-standard cameras, i.e. progressive scan, can also be interfaced by utilizing an easy to use Camera Editor.
Single-channel and dual-channel cameras are supported in all operating modes.
PicPort®-Digital accepts 1×8-bit digital input at 40 MHz or 1×16-bit digital input at 20 MHz
Digitizers and Input LUT
For the PicPort® range 8 bit, 20MHz, A-to-D's are used to digitize the video input. The PicPort®-Mono has a single A to D and the PicPort®-Stereo has two. A programmable Input LUT can be used for real-time manipulation of brightness, contrast, gain and offset.
Image Preprocessing
The digitized image may be scaled down (using fine mathematical interpolation algorithms), mirrored, or overlaid by arbitrary graphics. Finally, it is converted to desired target color model (RGB or monochrome with different bit depths). For display on 8-bit VGA card, the 20 Windows system colors are preserved by means of LUT; 236 grayscale values are represented on the card.
Data Transfer
The digitized and conditioned data is transferred using two independent DMA channels directly to the CPU and/or video memory without on board intermediate storage and with minimal CPU intervention. The board acts as a PCI bus master allowing transfers at peak rates of up to 132 MB/s i.e. real time transfer for all acquisition modes.
The two independent DMA channels provide many modes of operation including simultaneous transfer of video data from a single image source to main memory for processing and to video memory for display. A dual channel camera, that outputs two fields of the same frame simultaneously, can be combined to build up a complete image in real time. Transfer of images from two synchronized cameras to two independent memory windows.
Synchronization
PicPort® framegrabbers are able to work in the «slave» synchronization mode (accepting CVBS, H/V or pixel clock synchronizing signals from the camera) or in the «master» mode (controlling camera timing by providing H/V or pixel clock synchronization). Furthermore, they are able to work in asynchronous (triggered) mode.
Input/Output Connector Configurations
All the PMC based PicPort®-Mono/Stereo/Color framegrabbers are equipped with a single D-sub 25-pin camera interface connector (older PicPort®-Mono/Stereo were equipped with a 44-pin camera interface connector). In addition to the video inputs, the camera interface connector also handles the H/V synchronization and pixel clock i/o as well as the 12VDC power supply for the cameras.
Besides the camera interface connector the PMC models are equipped with a 40-pin flatcable digital control i/o interface possessing 8 programmable opto-isolated general purpose I/O lines.
The video interface is model specific:
PicPort®-Color-PMC provides 4 CVBS or 3 CVBS + 1 S-video inputs, where only one input may be digitized at a time via its single digitizer.
PicPort®-Mono-PMC features 4 video inputs, where only one each input may be digitized at a time via a single digitizer.
PicPort®-Stereo-S-PMC has also 4 video inputs, but two of them may be digitized simultaneously via two digitizers.
PicPort®-Stereo-D-PMC has 4 video inputs as well, but is intended for dual-channel cameras where only one dual-channel camera can be digitized at a time.
Finally, PicPort®-Digital is equipped with a 16-bit input (1×16-bit or 2×8-bit).
Operating System
PentiCam is based on world's most widespread platform - Windows NT/2000, Windows NT Embedded, Windows 95/98/Me. This enables the user to work in familiar environment, with familiar tools and with full compatibility to existing applications. Moreover, the Linux platform is supported as well.
LV-SDS
Leutron Vision Software Development Suite, LV-SDS, is a software development package (Windows, Linux) that allows full control of all PicPort® products. The suite consists of Daisy - the primary software interface for PicPort® cards, Camera Editor - simple interactive setup of standard and non-standard cameras, DRAL - a library for handling specific time-critical tasks, Orchid - high level library (DLL or OCX) for quick and easy design of PicPort® applications, TWAIN Driver and Video for Windows - provides a simple interface between Leutron Vision hardware and other image manipulation programs.
To get the most comprehensive information, you may also freely download the LV-SDS manual.
Third Party Packages
Several well-known third party packages for real-time image processing and analysis are also supported. The packages include HALCON, Activ Vision Tools, and others. Please refer to our detailed software brochure (PDF) for more details.
Demo Software and Sample Code
The software products come complete with a set of demo programs and additional examples with source code as a guide to the programmer in developing particular applications.
| Bus interface |
PMC IEEE 1386.1; based on PCI Revision 2.1 |
| OS support |
Windows 2000/NT, Windows Me/98/95, Embedded NT, Linux |
| Host processor |
Intel Pentium II/III Mobile Module MMC-2 |
| Memory |
64-512 MB 3.3V SDRAM, standard 144-pin SO DIMM |
| Main board |
standard BIOS, EIDE/UDMA controller, floppy controller, 10/100Mbit Ethernet controller |
| Graphic controller |
on mainboard, AGP, 4 MB memory (8 MB 3D option) |
| Storage devices |
2.5" HDD, 2-20 GB, shockproof,
Compact FlashDisk PCMCIA 50-pin, Type I and II ATA interface,
IBM 1" microdrives |
| Expadability |
4 PMC boards max. (3.3V PCI bus) |
| Image inputs |
up to 8; CCIR/RS170/nonstandard, PAL/NTSC, digital |
| Image geometry |
2:1 interlaced, noninterlaced, progressive, dual channel;
resolution programmable up to 2048×2048;
pixel shape CCIR601, square, programmable |
| Frame grabbers |
PicPort®-Mono/Stereo/Color/Digital, PMC modules |
| Data digitization |
up to 20MHz, 8-bit per channel or YUV 4:2:2 |
| Image coding |
8-bit luminance or YUV 4:2:2 |
| Digitizing parameters |
input LUTs, brightness and contrast, gain, offset, all independently programmable |
| Image preprocessing |
interpolative downscaling, H/V mirroring, overlay, color format conversion |
| Transfer from grabber to host |
bus master burst DMA transfer, peak rate up to 132 MB/s, real time for all acquisition modes |
| Synchronization |
from CVBS, H/V, pixel synchronized;
as slave or master |
| Asynchronous acquisition |
by external HW trigger |
| Camera i/o |
D-sub 25-pin female all purpose connector (video inputs, synchronization i/o, camera power) |
| Digital control i/o |
40-pin flat cable DIN41651 with 8 opto-isolated inputs and 8 opto-isolated outputs |
| PC related i/o |
COM1 (opt. COM2), opt. IrDA, LPT1, PS/2 Keyboard, PS/2 Mouse, VGA, USB, Ethernet 10/100Mbit |
| Dimensions |
aprox. 91×91×165 mm w/o built-in camera |
| Power requirements |
24 VDC, 30-45 W (configuration dependent) |
| Operating temperature |
5-40 °C |
Supporting software
Comprehensive set of software tools consisting of video capture libraries
and image processing
libraries for Windows NT4/95/98/2000 and for Linux. Please check especially the
following ones:
- Daisy
- Video capture library of LV-SDS (Software Development
Suite). Object oriented library of functions controlling all
features of PicPort® framegrabbers and PentiCam®.
- Camera editor
- An easy-to-use application enabling user to connect one of
many predefined video sources or specify another, even
nonstandard one.
- DRAL
- Extension libraries for Daisy providing real-time functionality of PicPort® framegrabbers.
- Orchid
- High level library for developing interactive applications with a few lines of code in visual tools like Microsoft Visual Basic, Borland Delphi, Borland C++ Builder, etc. Available as a DLL or as an OCX component.
Cameras
for use with PentiCam®
Leutron Vision offers wide range of industrial CCD cameras. The best suited for work with PentiCam®-Color models are:
- LV-2000/2000CE
- Color auto focus camera with 16× zoom and external
RS-232C control.
- SONY XC-003/003P
- Color high resolution 3-chip CCD camera, cosite sampling,
asynchronous shutter.
- SONY XC-711/711P
- Color high resolution 1-chip CCD camera, RGB primary color
stripe filter, electronic shutter.
- SONY XC-999/999P
- Color miniature cigar-type color CCD camera, electronic
shutter, CCD iris, auto iris, signal cable can be more than 100
m long.
- LV-75/75CE
- Monochrome high resolution camera, various shutter modes,
restart/reset capability, field/frame integration.
- SONY XC-75/75CE
- Similar to LV-75/75CE.
- LV-65/65CE
- Low-cost monochrome CCD camera.
The best suited cameras for PentiCam®-Mono are:
- LV-75/75CE
- High resolution camera, various
shutter modes, restart/reset capability, field/frame integration.
- SONY XC-75/75CE
- Similar to LV-75/75CE.
- LV-95
- High speed partial scanning camera
(up to 360 fps), compatible with LV-75.
- LV-1000
- Megaresolution (1.3M pixels)
progressive scanning camera.
- SONY XC-55/55BB
- Progressive scanning camera with a
single-channel output; remote head version is available.
- LV-65/65CE
- Low cost camera with high
resolution and standard electronic shutter.
The best suited cameras for PentiCam®-Stereo are:
- LV-7500/8500
- Full frame shutter camera with
dual-channel output and restart/reset capability.
- SONY XC-7500/8500
- Similar to LV-7500/8500.
- LV-1000
- Megaresolution (1.3M pixels)
progressive scanning camera.
- SONY XC-55/55BB
- Progressive scanning camera with a
single-channel output; remote head version is available.
- LV-75/75CE
- High resolution camera, various
shutter modes, restart/reset capability, field/frame integration.
- SONY XC-75/75CE
- Similar to LV-75/75CE.
- LV-95
- High speed partial scanning camera
(up to 360 fps), compatible with LV-75.
Correspondent cables
All the necessary cables for connecting a camera to the
framegrabber are available.
PicPort®
framegrabbers
- PicPort®-Color
- Line of low cost framegrabbers providing studio quality digitization and preprocessing of color video image. Available in versions for standard PCI bus, CompactPCI bus or as PMC modules.
- PicPort®-Mono
- Line of framegrabbers for monochrome acquisition
(CCIR/EIA/nonstandard), with five sync modes and asynchronous
acquisition. Available in versions for standard PCI bus, CompactPCI bus or as PMC modules.
- PicPort®-Stereo
- Fully compatible board with PicPort®-Mono, but with second digitizing channel
allowing simultaneous acquisition from two synchronized cameras
or from a dual-channel camera.
Note: All the missing ordering numbers will be specified soon. Please contact Leutron Vision to get accurate ordering information.
| Ordering number
|
Product
|
Description
|
| 12400
|
PentiCam®-PPC/HDD/333/64
|
Pentium II computer with PicPort®-Color frame grabber, PII 333 MHz, 64 MB SDRAM, IDE HDD with 3 GB min., COM1, LPT1, USB, Ethernet 10/100 Mbit, Mouse/Keyboard connector, AGP-VGA 4 MB, 24 VDC/2.0 A input, cabinet 90×90×162 mm, ready to use without OS/LV-SDS
|
| 12401
|
PentiCam®-PPC/HDD/333/128
|
Pentium II computer with PicPort®-Color frame grabber, PII 333 MHz, 128 MB SDRAM, IDE HDD with 3 GB min., COM1, LPT1, USB, Ethernet 10/100 Mbit, Mouse/Keyboard connector, AGP-VGA 4 MB, 24 VDC/2.0 A input, cabinet 90×90×162 mm, ready to use without OS/LV-SDS
|
| 12402
|
PentiCam®-PPC/HDD/333/256
|
Pentium II computer with PicPort®-Color frame grabber, PII 333 MHz, 256 MB SDRAM, IDE HDD with 3 GB min., COM1, LPT1, USB, Ethernet 10/100 Mbit, Mouse/Keyboard connector, AGP-VGA 4 MB, 24 VDC/2.0 A input, cabinet 90×90×162 mm, ready to use without OS/LV-SDS
|
| 12430
|
PentiCam®-PPM/HDD/333/64
|
Pentium II computer with PicPort®-Mono-25S frame grabber, PII 333 MHz, 64 MB SDRAM, IDE HDD with 3 GB min., COM1, LPT1, USB, Ethernet 10/100 Mbit, Mouse/Keyboard connector, AGP-VGA 4 MB, 24 VDC/2.0 A input, cabinet 90×90×162 mm, ready to use without OS/LV-SDS
|
| 12431
|
PentiCam®-PPM/HDD/333/128
|
Pentium II computer with PicPort®-Mono-25S frame grabber, PII 333 MHz, 128 MB SDRAM, IDE HDD with 3 GB min., COM1, LPT1, USB, Ethernet 10/100 Mbit, Mouse/Keyboard connector, AGP-VGA 4 MB, 24 VDC/2.0 A input, cabinet 90×90×162 mm, ready to use without OS/LV-SDS
|
| 12432
|
PentiCam®-PPM/HDD/333/256
|
Pentium II computer with PicPort®-Mono-25S frame grabber, PII 333 MHz, 256 MB SDRAM, IDE HDD with 3 GB min., COM1, LPT1, USB, Ethernet 10/100 Mbit, Mouse/Keyboard connector, AGP-VGA 4 MB, 24 VDC/2.0 A input, cabinet 90×90×162 mm, ready to use without OS/LV-SDS
|
| 12460
|
PentiCam®-PPS-S/HDD/333/64
|
Pentium II computer with PicPort®-Stereo-25S frame grabber, PII 333 MHz, 64 MB SDRAM, IDE HDD with 3 GB min., COM1, LPT1, USB, Ethernet 10/100 Mbit, Mouse/Keyboard connector, AGP-VGA 4 MB, 24 VDC/2.0 A input, cabinet 90×90×162 mm, ready to use without OS/LV-SDS
|
| 12461
|
PentiCam®-PPS-S/HDD/333/128
|
Pentium II computer with PicPort®-Stereo-25S frame grabber, PII 333 MHz, 128 MB SDRAM, IDE HDD with 3 GB min., COM1, LPT1, USB, Ethernet 10/100 Mbit, Mouse/Keyboard connector, AGP-VGA 4 MB, 24 VDC/2.0 A input, cabinet 90×90×162 mm, ready to use without OS/LV-SDS
|
| 12462
|
PentiCam®-PPS-S/HDD/333/256
|
Pentium II computer with PicPort®-Stereo-25S frame grabber, PII 333 MHz, 256 MB SDRAM, IDE HDD with 3 GB min., COM1, LPT1, USB, Ethernet 10/100 Mbit, Mouse/Keyboard connector, AGP-VGA 4 MB, 24 VDC/2.0 A input, cabinet 90×90×162 mm, ready to use without OS/LV-SDS
|
| 12490
|
PentiCam®-PPS-D/HDD/333/64
|
Pentium II computer with PicPort®-Stereo-25D frame grabber, PII 333 MHz, 64 MB SDRAM, IDE HDD with 3 GB min., COM1, LPT1, USB, Ethernet 10/100 Mbit, Mouse/Keyboard connector, AGP-VGA 4 MB, 24 VDC/2.0 A input, cabinet 90×90×162 mm, ready to use without OS/LV-SDS
|
| 12491
|
PentiCam®-PPS-D/HDD/333/128
|
Pentium II computer with PicPort®-Stereo-25D frame grabber, PII 333 MHz, 128 MB SDRAM, IDE HDD with 3 GB min., COM1, LPT1, USB, Ethernet 10/100 Mbit, Mouse/Keyboard connector, AGP-VGA 4 MB, 24 VDC/2.0 A input, cabinet 90×90×162 mm, ready to use without OS/LV-SDS
|
| 12492
|
PentiCam®-PPS-D/HDD/333/256
|
Pentium II computer with PicPort®-Stereo-25D frame grabber, PII 333 MHz, 256 MB SDRAM, IDE HDD with 3 GB min., COM1, LPT1, USB, Ethernet 10/100 Mbit, Mouse/Keyboard connector, AGP-VGA 4 MB, 24 VDC/2.0 A input, cabinet 90×90×162 mm, ready to use without OS/LV-SDS
|
| PentiCam® base systems
|
| 11900
|
PentiCam®-Base/1×PMC/4MB/0.83A
|
Pentium II/III computer, IDE interface, COM1, LPT1, USB, Ethernet 10/100 Mbit, Mouse/Keyboard connector, AGP-VGA 4 MB, space for 1 PMC module (e.g. PicPort®), 18-36 V in, 5 VDC/5 A & 12 VDC/0.83 A, fan ,cabinet 165×90×90 mm, without PicPort®, Pentium, SDRAM, HDD, OS, LV-SDS
|
| 11901
|
PentiCam®-Base/2×PMC/4MB/1.66A
|
Pentium II/III computer, IDE interface, COM1, LPT1, USB, Ethernet 10/100 Mbit, Mouse/Keyboard connector, AGP-VGA 4 MB, space for 2 PMC modules (e.g. PicPort®), 18-36 V in, 5 VDC/5 A & 12 VDC/1.66 A, fan ,cabinet 165×106×90 mm, without PicPort®, Pentium, SDRAM, HDD, OS, LV-SDS
|
| 11902
|
PentiCam®-Base/3×PMC/4MB/1.66A
|
Pentium II/III computer, IDE interface, COM1, LPT1, USB, Ethernet 10/100 Mbit, Mouse/Keyboard connector, AGP-VGA 4 MB, space for 3 PMC modules (e.g. PicPort®), 18-36 V in, 5 VDC/5 A & 12 VDC/1.66 A, fan ,cabinet 165×123×90 mm, without PicPort®, Pentium, SDRAM, HDD, OS, LV-SDS
|
| 11903
|
PentiCam®-Base/4×PMC/4MB/1.66A
|
Pentium II/III computer, IDE interface, COM1, LPT1, USB, Ethernet 10/100 Mbit, Mouse/Keyboard connector, AGP-VGA 4 MB, space for 4 PMC modules (e.g. PicPort®), 18-36 V in, 5 VDC/5 A & 12 VDC/1.66 A, fan ,cabinet 165×140×90 mm, without PicPort®, Pentium, SDRAM, HDD, OS, LV-SDS
|
| 11910
|
PentiCam®-Base/1×PMC/8MB/0.83A
|
Pentium II/III computer, IDE interface, COM1, LPT1, USB, Ethernet 10/100 Mbit, Mouse/Keyboard connector, AGP-VGA 8 MB, space for 1 PMC module (e.g. PicPort®), 18-36 V in, 5 VDC/5 A & 12 VDC/0.83 A, fan ,cabinet 165×90×90 mm, without PicPort®, Pentium, SDRAM, HDD, OS, LV-SDS
|
| 11911
|
PentiCam®-Base/2×PMC/8MB/1.66A
|
Pentium II/III computer, IDE interface, COM1, LPT1, USB, Ethernet 10/100 Mbit, Mouse/Keyboard connector, AGP-VGA 8 MB, space for 2 PMC modules (e.g. PicPort®), 18-36 V in, 5 VDC/5 A & 12 VDC/1.66 A, fan ,cabinet 165×106×90 mm, without PicPort®, Pentium, SDRAM, HDD, OS, LV-SDS
|
| 11912
|
PentiCam®-Base/3×PMC/8MB/1.66A
|
Pentium II/III computer, IDE interface, COM1, LPT1, USB, Ethernet 10/100 Mbit, Mouse/Keyboard connector, AGP-VGA 8 MB, space for 3 PMC modules (e.g. PicPort®), 18-36 V in, 5 VDC/5 A & 12 VDC/1.66 A, fan ,cabinet 165×123×90 mm, without PicPort®, Pentium, SDRAM, HDD, OS, LV-SDS
|
| 11913
|
PentiCam®-Base/4×PMC/8MB/1.66A
|
Pentium II/III computer, IDE interface, COM1, LPT1, USB, Ethernet 10/100 Mbit, Mouse/Keyboard connector, AGP-VGA 8 MB, space for 4 PMC modules (e.g. PicPort®), 18-36 V in, 5 VDC/5 A & 12 VDC/1.66 A, fan ,cabinet 165×140×90 mm, without PicPort®, Pentium, SDRAM, HDD, OS, LV-SDS
|
| Framegrabbers for PentiCam®
|
| 11430
|
PicPort®-Color for PentiCam®
|
Studio quality frame grabber for PentiCam®, accepts NTSC/PAL Color video sources, CVBS and S-video; 4 CVBS or 3 CVBS + 1 S-video inputs, 8 opto-isolated digital in- and 8 outputs, 12 V/500 mA camera supply, all on 25-pin DSub connector
|
| 11441
|
PicPort®-Mono-25S for PentiCam®
|
Monochrome frame grabber for PentiCam®, 1 digitizer channel with 8-bit/20 MHz ADC, PCI-busmaster, interpolating scaler, lockmask, 8 opto-isolated digital in- and 8 outputs, video signals and 12 V/500 mA camera supply, all on 25-pin DSub connector
|
| 11452
|
PicPort®-Stereo-25S for PentiCam®
|
Monochrome frame grabber for PentiCam®, 2 digitizer channels for single-channel cameras, 8-bit/20 MHz ADC, PCI-busmaster, interpolating scaler, lockmask, 8 opto-isolated digital in- and 8 outputs, video signals and 12 V/500 mA camera supply, all on 25-pin DSub connector
|
| 11453
|
PicPort®-Stereo-25D for PentiCam®
|
Monochrome frame grabber for PentiCam®, 2 digitizer channels for dual-channel cameras, 8-bit/20 MHz ADC, PCI-busmaster, interpolating scaler, lockmask, 8 opto-isolated digital in- and 8 outputs, video signals and 12 V/500 mA camera supply, all on 25-pin DSub connector
|
| 11460
|
PicPort®-Digital/422 for PentiCam®
|
Digital monochrome framegrabber for PentiCam®, 2 image data input channels with 8-bit/20 MHz or 16-bit/20 MHz (RS422) each & 13 digital I/O signals (RS422) for camera control, busmaster, interpolating scaler, lockmask, HW-data formatting, 60-pin LFH connector
|
| 11461
|
PicPort®-Digital/644 for PentiCam®
|
Digital monochrome framegrabber for PentiCam®, 2 image data input channels with 8-bit/20 MHz or 16-bit/20 MHz (RS644) each & 13 digital I/O signals (RS644) for camera control, busmaster, interpolating scaler, lockmask, HW-data formatting, 60-pin LFH connector
|
| 11462
|
PicPort®-Digital/644TTL for PentiCam®
|
Digital monochrome framegrabber for PentiCam®, 2 image data input channels with 8-bit/20 MHz or 16-bit/20 MHz (RS644) each & 13 digital I/O signals (TTL) for camera control, busmaster, interpolating scaler, lockmask, HW-data formatting, 60-pin LFH connector
|
| Other components for PentiCam®
|
| 11480
|
Digital I/O board for PentiCam®
|
PCI bus board for PentiCam® with 32 digital in- and 32 digital outputs, all of them optical isolated, inuts are level- or edge triggered, inputs can control an interrupt, all on 2 pcs. 37-pin DSub connectors, supported by LV-SDS
|
| 11419
|
PTCM/Extender for 3rd party PMC
|
Extender board to install a 3rd party PMC module in a PentiCam®, one 3rd party PMC module per PentiCam® only, takes 2 slot units in height (33 mm) incl. 3rd party module, requires a custom back plane corresponding to the 3rd party module
|
| 11×××
|
Various products
|
Please check our pricelist to find an ever growing number of components for PentiCam®: processors (Pentium II/III, SDRAM memories, hard drives (incl. IBM Microdrive), CompactFlash disks, operating systems (Windows 2000/NT4/NT4 embedded, Linux) and other spare parts
|
| Complementary products
|
| 16028
|
LV-SDS
|
Software developer's suite for PicPort® boards and PentiCam®
|
| 14×××
|
Various cables
|
All needed cables of various lengths
|
|
PentiCam®